Table of Contents
Advertisement
Installation and Operation, cont'd
Auto Imaging menu (Auto Set)
The following flowchart illustrates the Auto-Image™ feature.
Pressing the Next button will display the submenu and
automatically size and center the displayed image to fill the
output screen.
Extron
Power
on
VSC 500
Figure 2-9 — Auto imaging menu
If you press the Menu button while a submenu is active,
the next main menu will become active. For example,
the menu will change from the Auto Imaging submenu
to the Output Configuration main menu.
To return to the default menu cycle, let the VSC time-
out for 10 seconds, or press the Menu button until the
Exit Menu menu appears, then press the Next button.
Output Configuration menu (Output Config)
The following flowchart provides an overview of the Output
Configuration menu.
Auto Set
NEXT=Go
MENU
Output
NEXT
Config
No Input
NEXT
NEXT
Black
Display screen if no
input
• Black (default)
• Bars [color bars]
Figure 2-10 — Output configuration menu
2-16
VSC 500/700/700D • Installation & Operation
2 sec.
31.46KHz
59.94 Hz
2 sec.
2 sec.
MENU
Auto Set
Auto Set
NEXT
NEXT=Go
...
Auto imaging
• automatically sizes
and centers the input
to fill the screen
Output
Standard
NEXT
NEXT
RGBHV
NTSC
Sync formats
Video standard
• RGBHV (default)
• NTSC (default)
• RGBS
• PAL
• RGsB
• Component
Set PAL
Set NTSC
NEXT
On
Off
Set PAL pedestal on or off
Set NTSC pedestal on or off
• On
• On
• Off
• Off
Output signal submenu (Output)
The VSC will simultaneously output RGB, Composite video,
S-video, and SDI (VSC 700D only). The RGB type must be
selected from this submenu.
The VSC Rotate the Adjust horizontal knob (
vertical knob ( ) to select from among the following sync
formats:
• RGBHV (default)
• RGBS
• RGsB
• Component
Video standard submenu (Standard)
The VSC offers a choice of video standards. Rotate the Adjust
horizontal knob (
) or Adjust vertical knob ( ) to select from
among the following video standards:
• NTSC (default)
• PAL
Set NTSC pedestal submenu (Set NTSC)
The pedestal for NTSC video format may be turned on or off.
See the note below. Rotate the Adjust horizontal knob (
Adjust vertical knob ( ) to turn the pedestal On or Off.
Pedestal is an offset that separates the active video from
the blanking level. When pedestal is set to Off, black and
blanking level are the same because there is no longer an
offset between blanking level and active video.
Set PAL pedestal submenu (Set PAL)
The pedestal for PAL video format may be turned on or off. See
the note above. Rotate the Adjust horizontal knob (
Adjust vertical knob ( ) to turn the pedestal On or Off.
No input signal display type submenu (No Input)
When no input is present, the VSC offers two types of outputs.
Rotate the Adjust horizontal knob (
( ) to select from among the following display types when no
input signal is present:
• Black screen (default)
• Bars (color bars)
VSC 500/700/700D • Installation & Operation
) or Adjust
) or
) or
) or Adjust vertical knob
2-17
Advertisement
Table of Contents
