Table of Contents
Advertisement
Installation and Operation, cont'd
Output Configuration menu (Output Config)
The following flowchart provides an overview of the Output Configuration
menu.
Display screen if no
input
• Black Video (default)
• Color Bars
Figure 2-12 — Output configuration menu
Output signal submenu (Output)
The VSC will simultaneously output RGB or component video, composite video,
S-video, and SDI component (VSC 900D only). The RGB type must be selected
from this submenu.
Use the Cursor buttons to select from among the following sync formats:
Video standard submenu (Standard)
The VSC offers a choice of video standards. Use the Cursor buttons to select from
between the following video standards:
Set NTSC pedestal submenu (Setup NTSC)
The pedestal for NTSC video format may be turned on or off. See the following
note. Rotate the horizontal Adjust knob (
the pedestal on or off.
2-12
VSC 900/900D • Installation and Operation
If you press the Menu button while a submenu is active, the next main menu
will become active. For example, the menu will change from the Auto
Imaging submenu to the Output Configuration main menu.
To return to the default menu cycle, let the VSC time-out for 10 seconds, or
press the Menu button until the Exit Menu menu appears, then press the
Next button.
Press NEXT to
Auto Image
MENU
Output
NEXT
Config
Sync formats
• RGBHV (default)
• RGBs
• RGsB
• Component (R-Y, Y, B-Y)
No Input
NEXT
Black Video
Set PAL pedestal on or off.
• On
• Off
• RGBHV (default)
• RGBS
• NTSC (default)
Output
NEXT
RGBHV
Standard
• NTSC (default)
• PAL
Setup PAL
Setup NTSC
NEXT
On
Set NTSC pedestal on or
off.
• On
• Off
• RGsB
• Component
• PAL
) or vertical Adjust knob ( ) to turn
Standard
NEXT
NTSC
Off
Advertisement
Table of Contents
