Table of Contents
Advertisement
Input Configuration Submenu
EDID (Extended Display Identification Data)
(Inputs 5, 6, 8, and 10)
The resolution and refresh rate of a display device
(available only for RGB and DVI inputs)
NOTE: This submenu is not displayed when
input 1-4, 7, or 9 is selected.
Output Configuration Menu
The output configuration menu allows you to set output resolution and refresh rate, output
signal type, and sync polarity (RGBHV only). The following flow diagram shows the output
configuration submenus and the adjustments that can be made from them.
Input
Configuration
Menu
Output
Configuration
Next
Figure 17.
Resolutions and refresh rates submenu
While the Output Configuration menu is displayed, rotate the horizontal Adjust ( [ )
knob to select the output resolution and the vertical Adjust ( { ) knob to select the refresh
rate. The default resolution and rate for the DVS 510 Series are 1024x768 @ 60 Hz.
The
DVS 510 Series.
Resol
1024 x 768
Next
Refresh
@ 60 Hz
Resolution
Refresh Rate
Select the output resolution
and refresh rate.
See the table on the next page
for available combinations of
resolutions and refresh rates.
Default: 1024 x 768 @ 60 Hz
Output Configuration Menu
table on the next page
shows the available resolutions and refresh rates on the
Horizontal ( [ ) and Vertical Knob ( { ) Adjustment
Select an EDID to apply to the selected input.
The horizontal ( [ ) ADJUST knob selects the
•
resolution.
•
The vertical ( { ) ADJUST knob selects the refresh rate.
Output Type
Next
Next
RGBHV
Video signal types
Select the output signal format:
•
RGBHV (default)
•
RGBS
•
RGsB
•
YUV Bi-level (EDTV standard)
•
YUV Tri-level (HDTV standard)
DVS 510 Series • Operation
Sync Polarity
H –
V –
Polarity combinations
Select the sync polarity
combination:
Next
•
H –
V – (default)
•
H –
V +
•
H +
V –
•
H +
V +
•
N/A*
*Appears when a signal type
other than RGBHV is selected.
26
Advertisement
Table of Contents
