Output Configuration Menu - Extron electronics DVS 510 User Manual

Output Configuration Menu

The output configuration menu allows you to set output resolution and refresh rate, output
signal type, and sync polarity (RGBHV only). The following flow diagram shows the output
configuration submenus and the adjustments that can be made from them.
Input
Configuration
Menu
Output
Configuration
Next
Figure 16.
Resolutions and refresh rates submenu
While the Output Configuration menu is displayed, rotate the horizontal Adjust ([) knob
to select the output resolution and the vertical Adjust ({) knob to select the refresh rate. The
default resolution and rate for the DVS 510 Series are 1024x768 @ 60 Hz.
The table on the next page
DVS 510 Series.
Resol 1024 x 768
Next Next
Refresh @ 60 Hz
Resolution Refresh Rate
Select the output resolution
and refresh rate.
See the table on the next page
for available combinations of
resolutions and refresh rates.
Default: 1024 x 768 @ 60 Hz
Output Configuration Menu
shows the available resolutions and refresh rates on the
Output Type
Next
RGBHV
Video signal types
Select the output signal format: Select the sync polarity
combination:
• RGBHV (default)
•
• RGBS
•
• RGsB
•
• YUV Bi-level (EDTV standard)
•
• YUV Tri-level (HDTV standard)
•
*Appears when a signal type
DVS 510 Series • Operation
Sync Polarity
H – V –
Polarity combinations
Next
H – V – (default)
H – V +
H + V –
H + V +
N/A*
other than RGBHV is selected.
26