Chapter 3
Connecting and assembling a DC/DC power supply
HN9200 Satellite Modem Installation Guide
18
1038622-0001 Revision B
Figure 7: Connecting an AC power supply
Figure 8: DC/DC power supply
HN9200 modem.
Figure 8: DC/DC power supply
Connect and assemble the DC/DC power supply as follows:
1. Connect the DC power cord to the DC IN port on the modem.
Note: The input cable kit is included in the power supply kit. The cable kit contains
an input power connector, connector pins, and a wiring diagram; it does not include
wire.
2. Assemble the input power cable according to the wiring diagram included in the cable kit.
on page 18 shows the DC/DC power supply used with the
Installing the satellite modem