Entering Commissioning Parameters; Figure 12: Configuration File Upload Screen; Figure 13: Confirming The Sbc.cfg File Upload - Hughes HN9200 Installation Manual

Chapter 4

Entering commissioning parameters

HN9200 Satellite Modem Installation Guide
26
1038622-0001 Revision B

Figure 12: Configuration File Upload screen

5. Click Browse on the Configuration File Upload screen.
6. Navigate to the location on the installer laptop where you saved the sbc.cfg file.
7. Select the sbc.cfg file and click Open.
8. Click Upload, and wait for the upload to complete.
9. Wait to see the message shown in
which indicates that the configuration has been transferred to the modem.

Figure 13: Confirming the sbc.cfg file upload

10. After the upload completes, click Close on the Configuration File Upload screen to return
to the Satellite Setup menu.
To commission the satellite modem you enter parameters for the antenna location, satellite, and
radio. In some circumstances you may have to enter the antenna location and/or satellite
parameters manually, as explained in the sections that follow.
Commissioning the satellite modem
Figure 13: Confirming the sbc.cfg file upload on page 26,