Power Supply Information; Figure 5: Power Supply For The Hn9000 Satellite Modem; Table 2: Power Supply Specifications For The Hn9000 Satellite Modem - Hughes HN9000 User Manual

Chapter 1
Interface ports
Power supplies and power requirements

Power supply information

The power supply is included in the satellite modem shipping carton.
Before proceeding, make sure you have the correct power supply. Check the part number on the power supply and refer
to Table 2: Power supply specifications for the HN9000 satellite modem on page 4.
• Always use the power supply provided with the satellite modem. The modem's performance may suffer if the wrong
power supply is used.
• The input must be 110/130 VAC.
• A suitable surge protector is recommended to protect the satellite modem from possible damage due to power surges.
• If the satellite modem is installed outside the United States or Canada, observe the power standards and requirements
of the country where it is installed.

Table 2: Power supply specifications for the HN9000 satellite modem

Power supply type and part
number
AC/DC, 73 W
P/N 1501006-0001
Note: The satellite modem should be continuously powered on unless it will not be used for an extended period.
4
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. A

Figure 5: Power supply for the HN9000 satellite modem

Application
HN9000 satellite modem
with 1-W or 2-W radio
One Ethernet port supporting 10BaseT or 100BaseT
operation, RJ-45-switched
See Power supply information on page 4.
Electrical requirements
Input line voltage:
100 – 130 V, 2 A maximum
Input line frequency:
60 Hz AC
Rated power consumption: 73 W
Satellite modem overview
Power cord
Detachable, for 110
VAC outlet type.