Figure 11: Satellite Setup Menu - Hughes HN9200 Installation Manual

Commissioning the satellite modem

Figure 11: Satellite Setup menu

4. Click Config File Upload.
Note: Do not click Zip Code File Upload—this button is used to update the ZIP code
table in the modem.
Note: The following apply to the screen illustrations in this installation guide:
• Most screen illustrations show only the relevant part of the screen and do not include
features such as browser menus, toolbars, and window borders.
• The screen illustrations are examples. Values shown in these illustrations may not
apply to the satellite modem you are installing. Do not use values shown to install
or configure the modem unless the instructions say to do so.
• On some screens and in some messages you may see the word terminal or the
abbreviation VSAT. Both refer to the HN9200 satellite modem.
• Screen and page are both used to refer to a set of information from your computer
or satellite modem that is displayed on your computer monitor.
The Configuration File Upload screen appears.
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
Chapter 4
25