Items Required For Installation; Table 2: Power Supply Specifications For The Hn9200 Satellite Modem - Hughes HN9200 Installation Manual

Chapter 2

Items required for installation

HN9200 Satellite Modem Installation Guide
6
1038622-0001 Revision B
to have an electrician evaluate the electrical power outlet. N-G voltages may have a negative
impact on the performance of electronic equipment.
Grounding (modem, antenna, radio, and IFL)
Adhere to Hughes grounding requirements.
Use only approved ground wires, ground blocks, lugs, and clamps.
For detailed information refer to the appropriate FSB, as listed in
documents on page 11.
To install the HN9200 satellite modem, you need:
• HN9200 satellite modem
• Power supply (provided in the shipping carton)
• Surge protector (recommended), provided by the customer
• Cat-5 Ethernet cable
• sbc.cfg file (if you are instructed to upload it)
• Installation Reference Sheet (provided to the installer)
• Welcome to HughesNet quick start guide (1038043-0001) (to give to the customer)
Notes
sbc.cfg file – If needed, you can download the most current sbc.cfg file from your installation
support web site.
SAN and PIN – Identification numbers are required to register the satellite modem. Customers
who purchased their system from a Hughes retail channel in the United States or Canada receive
an order confirmation e-mail containing their site account number (SAN) and personal
identification number (PIN).
DC/DC power supply – If the site has a DC power source, it requires a DC/DC power supply.
See

Table 2: Power supply specifications for the HN9200 satellite modem

installer must provide the wire required to assemble the DC input power cable.
Additional equipment
• Antenna
• Hughes antenna pointing tool (DAPT for Ka-band, DAPT or OPI for Ku-band)
• IFL cables, cable connectors, and ground blocks
For more information on these items, see
No tools are required to install the modem. For tools needed to install the antenna mount and
antenna and point the antenna, see:
• Antenna Site Preparation and Mount Installation Guide (1035678-0001)
• The installation guide for the antenna model you are installing
Preparing for installation
Table 3: Related installation
Related components on page 9.
on page 8. The