Front Panel Leds; Figure 66: Front Panel Leds On The Hn9200 Modem; Table 10: Front Panel Led Indications - Hughes HN9200 Installation Manual

Chapter 7

Front panel LEDs

LED Appearance
LAN
Blinking
Transmit
Blinking, mostly on
Blinking, mostly off
Receive
HN9200 Satellite Modem Installation Guide
80
1038622-0001 Revision B
The satellite modem has five LEDs on the front panel, as shown in
on the HN9200 modem on page 80. By their appearance—on, off, blinking, or flashing—the
LEDs indicate the modem's operating status. All are blue when lit. The front panel LEDs are
all blue when lit.

Figure 66: Front panel LEDs on the HN9200 modem

Table 10: Front panel LED indications

LEDs are on, off, or blinking. On means the LED is continuously lit. Blinking means the LED
is usually on, but intermittently turns off briefly. Flashing means the LED alternates between
on and off for periods of ½ sec to 1 sec.
Table 10: Front panel LED indications
On Satellite modem is connected to a computer network card or Ethernet device
Transmitting and/or receiving data
Off No device is connected to the LAN port or the device connected to the LAN
port is not working properly
On OK – Transmit path is operational
Transmitting data
Ranging (The modem is measuring the distance to the satellite to calibrate
transmit timing and transmit power.)
Off * Condition preventing transmission
On OK – Receive path is operational
Figure 66: Front panel LEDs
on page 80 explains what the modem status is when the
Satellite modem status
LEDs