Installation Summary; Figure 2: Satellite Modem And Related Terminal Components - Hughes HN9200 Installation Manual

Satellite modem
Hide thumbs Also See for HN9200:
Table of Contents

Advertisement

Chapter 2

Installation summary

HN9200 Satellite Modem Installation Guide
4
1038622-0001 Revision B
This guide explains how to install the HN9200 satellite modem. It includes limited information
about other satellite terminal components. The satellite modem is the small indoor unit. The
satellite terminal includes the satellite modem and the antenna, radio assembly, and IFL cables,
as shown in

Figure 2: Satellite modem and related terminal components

Figure 2: Satellite modem and related terminal components
This summary focuses on installation of the satellite modem, but also includes some information
on related tasks such as antenna installation and pointing. The tasks listed below are the main
installation tasks, but these are not all of the installation tasks.
Complete all steps in the order they are presented in this installation guide unless you have a
specific reason for doing them in a different order. In any case, make sure all steps are completed.
You must install the antenna before the satellite modem can be commissioned. Then you point
the antenna as part of the modem commissioning procedure.
Details for the satellite modem installation tasks are included in later chapters in this guide.
Preparing for the installation
• Make sure you have all items required for installation, including the Installation Reference
Sheet, all equipment to be installed, and required tools for the outdoor equipment.
• Make sure the customer's computer meets the requirements listed in
requirements
on page 8.
• Conduct a site survey.
• Assemble and install the antenna and radio as instructed in the antenna installation guide.
Installing the satellite modem
• Connect the transmit and receive cables.
• Connect the modem to the installer laptop.
• Connect the power supply.
• Power up the modem and observe the LEDs to verify normal operation.
Commissioning the modem and pointing the antenna
• Upload the sbc.cfg file (if you are instructed to upload it).
Preparing for installation
on page 4.
Computer and networking

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents