Manually Accessing The Antenna Pointing Screens; Software Download-Manual Commissioning; Figure 46: Antenna Pointing Screen - Hughes HN9200 Installation Manual

Commissioning the satellite modem

Manually accessing the antenna pointing screens

Software download—manual commissioning
The modem saves the parameters and reboots.
To manually access the antenna pointing screens.
1. Open a web browser on the installer laptop.
2. Type http://192.168.0.1/fs/registration/ setup.html in the browser address bar and press
Enter. The Satellite Setup menu opens
3. Click Antenna Pointing. The Antenna Pointing screen appears as shown in
Antenna pointing screen
4. Select the antenna pointing tool you will use—DAPT, OPI, or N/A (none).
5. Click Next.

Figure 46: Antenna pointing screen

6. To continue manual commissioning, follow the steps in:
• Receive antenna pointing – Ka-band
• Receive antenna pointing – Ku-band
• Transmit antenna pointing – Ku-band
Prerequisite: Antenna pointing must be completed and validated.
1. Wait for the modem's operational software to download.
This may take about 15 minutes.
2. To confirm that the download is complete, follow the steps in
modem's files are up to date
The modem is now commissioned.
(Figure 44: Satellite Setup menu
on page 53.
on page 37 (Ka-band only)
on page 41 (Ku-band only)
on page 41 (Ku-band only)
on page 56.
HN9200 Satellite Modem Installation Guide
Chapter 4
on page 51).
Figure 46:
Confirming that the satellite
1038622-0001 Revision B
53