Commissioning the satellite modem
Entering the antenna location
Begin commissioning by entering the antenna location:
1. Open a browser on the installer laptop.
2. Type http://192.168.0.1/fs/registration/setup.html in the address bar.
3. Press Enter.
The Satellite Setup menu appears.
Figure 14: Satellite Setup menu
4. Click Registration - Installer.
5. If you are installing the satellite modem outside of the United States or Canada, go to
the antenna location (manual entry)
the antenna location.
If you are installing the modem in the United States or Canada, continue to the next step.
6. On the Antenna Location screen, enter the ZIP code of the installation location, and click
Next.
on page 28. Follow the steps there to manually enter
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
Chapter 4
Entering
27