Button Links; Figure 52: System Control Center Button Links; Table 6: System Status - Hughes HN9200 Installation Manual

System Control Center

Button links

Button
System Status
Reception Info
Transmission Info
System Info
At the top of each System Control Center page are four round buttons with labels above them
as shown in

Figure 52: System Control Center button links

the System Control Center page identified by the label—for example, the System Status button
is a link to the System Status page. Click the button to go to the page identified by the label. The
System Status button link is also a status indicator, as explained in
colors on page 66. The other three button links are links only; they are not indicators.
Figure 52: System Control Center button links
The destination page for each button link is identified below:
Table 4: Button links on System Control Center screens
Destination
System Status page
Reception Information page
Transmission Information
page
System Information page
Description of destination page
Displays general status information such as signal strength
and commissioning status. For more information see
System Status page on page 69.
Displays statistics about received data. For more
information see Reception Information page
Displays statistics about transmitted data. For more
information see Transmission Information page
73.
Displays system information such as the satellite modem's
serial number and software version. For more information
see System Information page
HN9200 Satellite Modem Installation Guide
Chapter 6
on page 65. Each button is a link to
Table 5: System Status button
on page 71.
on page
on page 74.
1038622-0001 Revision B
65