Registering The Satellite Modem; Figure 33: Manual Cross-Polarization Warning Message; Figure 34: Manual Cross-Polarization Test Results - Hughes HN9200 Installation Manual

Commissioning the satellite modem

Registering the satellite modem

Figure 33: Manual cross-polarization warning message

The Cross Pol Test window displays the test status, isolation value, and pass/fail result.

Figure 34: Manual cross-polarization test results

5. Adjust the antenna during the manual cross-polarization test to achieve maximum transmit
isolation.
6. Lock down the antenna adjustment when the modem consistently passes the manual
cross-polarization test.
7. Click Close to close the Cross Pol Test window.
8. On the Transmit Antenna Pointing screen, click Automatic to initiate the ACP test.
9. If the modem fails ACP, re-peak the transmit isolation in manual cross-polarization test
mode.
10. If the modem passes ACP, click Close to close the Cross Pol Test window.
Ku-band pointing is now complete.
11. What you do now depends on whether you are using satellite-based or manual commissioning:
• If you are using satellite-based commissioning, click Next on the Transmit Antenna
Pointing screen to continue.
• If you are following the instructions for Ku-band manual commissioning, click Exit;
then go to Software download—manual commissioning
To register the satellite modem with the service provider's network, you select and access a
registration server.
To register the satellite modem:
1. Click Next on the Transmit Antenna Pointing screen.
on page 53.
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
Chapter 4
43