Status And Information Screens; Red Flag Indicator; Figure 55: Format Of Status And Information Screens - Hughes HN9200 Installation Manual

Chapter 6

Status and information screens

Red flag indicator

HN9200 Satellite Modem Installation Guide
68
1038622-0001 Revision B
Several of the System Control Center screens list status and operational parameters and their
current values in a tabular format. For example, the following illustration shows the Reception
Information page. The left column list the parameters, and the right column shows the current
value of the parameter listed in the left column. Parameters are listed in this format on these
screens:
• System Status page
• Reception Information page
• Transmission Information page
On any of these screens, if a parameter name or the current value of a parameter is underlined,
you can click the name or value to see an explanation of it.

Figure 55: Format of status and information screens

The parameters listed on each screen are explained in this guide in the section for each screen:
• System Status page on page 69
• Reception Information page
• Transmission Information page
• System Information page
On the status and information screens, a red flag next to a value indicates a problem related to
the parameter listed in the same row where the flagged value appears. The flagged value appears
in the right column; the parameter appears in the left column. The value indicates the current
state of the parameter.
on page 71
on page 73
on page 74
System Control Center