Figure 18: Satellite Parameters Screen - Hughes HN9200 Installation Manual

Chapter 4
HN9200 Satellite Modem Installation Guide
30
1038622-0001 Revision B

Figure 18: Satellite Parameters screen

2. From the list, select the satellite transponder listed on the Installation Reference Sheet; then
click Next.
Note: If your satellite transponder is not listed in the drop-down list, you must use the
manual entry method. See
Note: The list of satellite transponders may be updated at any time, so you may see
different transponders than those shown in
page 30.
The Verification of Satellite Parameters screen appears.
Commissioning the satellite modem
Entering the antenna location (manual entry)
Figure 18: Satellite Parameters screen
on page 28.
on