Accessing The System Control Center; System Control Center Home Page - Hughes HN9200 Installation Manual

Chapter 6

Accessing the System Control Center

System Control Center home page

HN9200 Satellite Modem Installation Guide
62
1038622-0001 Revision B
Prerequisites: To access the System Control Center, a computer with a web browser installed
must be connected to the satellite modem's LAN port. (Because the System Control Center web
site is hosted on the modem, the computer does not have to be connected to the Internet.)
To open the System Control Center, double-click the System Control Center shortcut on your
computer desktop, or follow these steps:
1. Open a web browser such as Internet Explorer.
2. In the browser address bar, type www.systemcontrolcenter.com or 192.168.0.1 and press
Enter.
Note: To use 192.168.0.1, DHCP must be enabled on the computer.
The System Control Center home page appears as shown in
home page on page 63.
If you are unable to access the System Control Center, refer to
Control Center on page 94.
The System Control Center home page contains numerous links to satellite modem features and
important information regarding operation of the satellite modem.
The button links at the top of the page appear on all System Control Center screens and are
explained in Button links on page 65.
System Control Center
Figure 50: System Control Center
Cannot access the System