Entering Parameters-Manual Commissioning; Figure 44: Satellite Setup Menu - Hughes HN9200 Installation Manual

Commissioning the satellite modem
Entering parameters—manual commissioning
Note: The satellite modem's serial number must be loaded at the NOC by a NOC
representative to complete the manual commissioning process.
Follow these steps to enter the manual commissioning parameters:
1. Open a web browser on the installer laptop.
2. Type http://192.168.0.1/fs/registration/ setup.html in the browser address bar and press
Enter.
The Satellite Setup menu appears.

Figure 44: Satellite Setup menu

3. Click VSAT Manual Commissioning to access the Manual Commissioning page.
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
Chapter 4
51