Complete the steps in the order shown in Figure 5: Satellite modem installation summary on page 8 unless you have
a specific reason for doing them in a different order. In any case, make sure all steps are completed. Be aware that the
satellite modem has to provide the azimuth, elevation, polarization, and tilt angle values before antenna pointing can be
completed.
Conducting a site survey
Survey the customer site to confirm that it is satisfactory for installation of the satellite terminal.
The tasks listed here are the key tasks related to installation of the satellite modem. For complete site survey information,
see the Antenna Site Preparation and Mount Installation Guide (1035678-0001).
1. Use a GPS receiver to determine the latitude and longitude at the antenna site. Note the readings.
2. Make sure there is an unobstructed line of sight to the satellite indicated on the Installation Reference Sheet.
3. Confirm that the customer's computer meets the requirements listed in Computer requirements on page 12.
Instructions for other terminal components
This Installation Guide covers only installation of the satellite modem. For instructions on installing other components,
see Table 2: Related installation documents on page 9.
Table 2: Related installation documents
Component
Site survey, site preparation,
antenna mounts, IFL
IFL cable specifications
IFL cable connectors and
grounding
Antenna and radio assembly
Antenna – ballast
Antenna pointing
Power supply information
The power supply is included in the satellite modem shipping carton.
HN9000 Satellite Modem Installation Guide
1037576-0001 Rev. A
Where to find instructions
Antenna Site Preparation and Mount Installation Guide (1035678-0001)
Field Service Bulletin (FSB), IFL Cable, Approved List (with lengths) for Spaceway
Domestic Installations (FSB_080202_01)
Field Service Bulletin (FSB), HNS Broadband Requirements for RG-6 and RG-11
IFL Cable Connectors, Ground Blocks, and Ground Block Location
(FSB_050518_01)
See the antenna installation manual for the specific antenna model you are installing.
Antenna manuals are available on your installation support web site.
Ballast Calculation Tool User Guide (1033658-0001)
Ka-Band Antenna Pointing Guide (1037663-0001)
Chapter 2
9