Chapter 3: Installing The Satellite Modem - Hughes HN9200 Installation Manual

Chapter
3
Installing the satellite modem
Topics:
Prerequisites for installing the
modem
Selecting the modem installation
location
Modem operating position
Connecting the transmit and
receive cables
Connecting the installer laptop to
the modem
Connecting the power supply
Powering up the modem
LEDS on power-up
Installation of the HN9200 satellite modem consists of physical installation,
followed by commissioning and registration. These processes prepare the modem
for operation on the satellite network. Installation tasks include:
• Physical installation and power-up
• Entering parameters required for commissioning
• Commissioning, including antenna pointing
The installation software is factory pre-installed in the satellite modem. If
necessary, this software is automatically updated as part of the installation
process. You access the installation software through a browser on your installer
computer to perform tasks such as entering required parameters.
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
13