Figure 25: Selecting The Transmit Radio By Part Number - Hughes HN9200 Installation Manual

Chapter 4
HN9200 Satellite Modem Installation Guide
36
1038622-0001 Revision B
a) Click the Select transmit radio part number checkbox.
b) Click the drop-down list and select the transmit radio part number.

Figure 25: Selecting the transmit radio by part number

5. Click Next.
The Verification of Transmit Radio Parameters screen appears.
Note: The verification screen appears only if you selected the transmit radio by its part
number.
Note: The list of transmit radio part numbers may be updated at any time, so you may
see different part numbers than those shown in
by part number on page 36.
Commissioning the satellite modem
Figure 25: Selecting the transmit radio