Instructions For Related Components - Hughes HN9200 Installation Manual

Preparing for installation

Instructions for related components

Component or topic
Safety (all components)
Site survey
Site preparation
Antenna mounts
IFL
IFL cables (specifications, approved
types, maximum lengths)
IFL cable connectors
Grounding
Ground blocks
Antenna, antenna pointing
Radio assembly
This installation guide covers only installation of the satellite modem. For installation instructions
for other components, see Table 3: Related installation documents
or download these documents at https://dwayinstalls.hns.com/ (click Installer Login Click
Here!!) or your installation support web site. If you cannot log in, contact Installer Support—or
contact your program manager for access to these documents.
Table 3: Related installation documents
Antenna Site Preparation and Mount Installation Guide
(1035678-0001).
For Ku-band installations: Field Service Bulletin (FSB), IFL Cable,
Approved List (with lengths) for DW7x00, DW60xx, and DW40xx
Domestic Installations (FSB__060316_01).
(IFL cable specifications in this FSB apply to HN9200 Ka-band and
Ku-band installations.)
Field Service Bulletin (FSB), HNS Broadband Requirements for
RG-6 and RG-11 IFL Cable Connectors, Ground Blocks, and
Ground Block Location (FSB_050518_01).
See the antenna installation guide for the specific antenna model
you are installing.
For Ka-band antennas, see also the Ka-Band Antenna Pointing
Guide for Bent-Pipe Satellite Networks (1038764-0001).
Antenna pointing for Ku-band antennas is covered in the antenna
installation guide.
on page 11. You can view
Where to find instructions
HN9200 Satellite Modem Installation Guide
1038622-0001 Revision B
Chapter 2
11