Adjustment Of The Scanner Section - Toshiba e-STUDIO230L Service Handbook

3.7

Adjustment of the Scanner Section

3.7.1 Carriages
[A] Installing carriage wires
When replacing the carriage wires, refer illustrations below:
[Front side]
Wire pulley
[Rear side]
Idler pulley
Adjustment of the carriage wire tension is not necessary since a certain tension is applied to the car-
riage wires by the tension springs.
Note: Note:
Make sure the tension applied to the wire is normal.
© 2004 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Carriage-2
Carriage wire
Bracket for carriage-1
Hook
Tension spring
Fig. 3-29
Carriage-2
Carriage wire
Tension spring
Fig. 3-30
3 - 41
Idler pulley
Bracket for carriage-1
Hook
Wire pulley
e-STUDIO200L/202L/203L/230/232/233/280/282/283
3
ADJUSTMENT