Fine Adjustment Of Black Density - Toshiba e-STUDIO6520C Service Handbook

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO6520C:

Table of Contents

Fine adjustment of black density

The density of black side on scanned image is adjusted at color-scanning.

Original mode

Printed Image

Be careful for the value not to be too large since the gradation is reproduced worse in darker

While pressing [0] and [5] simultaneously, turn the power ON.

Key in the codes and press the [START] button.

Key in the adjustment values. Acceptable values: 0 to 4. (To correct the value once keyed in,

press the [CLEAR] button.)

Press the [ENTER] or [INTERRUPT] button to store the value in memory. → The equipment

goes back to the ready state.

Let the equipment restart and perform the scanning job.

If the desired image has not been attained, repeat step (1) to (5).

e-STUDIO5520C/6520C/6530C

The larger the value is, the black side of the image becomes darker.

Acceptable values: 0 to 4 (Default: 0)

Show Quick Links

Table of Contents

E-studio5520c E-studio6530c