Login and Basic Operations
This section describes how to input a command, login, logout, and change password.
Command Input
Described below are explanations of command input.
About Command
The EM card accepts commands sent from the CLI (Command Line Interface). When CLI is ready
for command input, it displays "$" sign as a prompt at the beginning of the line.
A command should be entered following the command prompt displayed on the screen. For the
commands that need parameters, those parameters should be separated with spaces.
Commands should be entered in 1-byte (half-size) alphanumeric and symbol or their combination.
Up to 255 characters can be accepted for one command.
Error Messages during Command Input
When the command is not correct, an error message appears.
-
-
27