Using Option 42 (Price Field); Using Option 50 (Bar Code Density) - Avery Dennison Monarch 9419 Reference Manual

U s i n g O p t i o n 4 2 ( P r i c e F i e l d )
Apply options to automatically insert monetary symbols. Do not use this option with Option 31
(define a check digit) or Option 60 (increment or decrement a field). This option is not
recommended for bar codes. When determining the maximum number of characters, add the
maximum number of digits and the monetary symbols.
Syntax
R,42,appear_code |
R1. R
R2. 42
R3. appear_code
Example
R,42,1 |
Uses a price field that prints the monetary symbol and notations as defined in the monetary
formatting packet.
U s i n g O p t i o n 5 0 ( B a r C o d e D e n s i t y )
Apply this option to bar code fields to create custom densities. This option overrides the density
value in the bar code field. To use this option, set the density parameter in the bar code field
to the default value. Only use this option once for each bar code field. Bar codes produced
using Option 50 may not be scannable. Synthetic supplies are recommended to produce
scannable bar codes.
The additional character gap, narrow space, and wide space parameters (R5, R6, R7) only need
to be specified with
♦
Code 39
♦
Codabar
If these parameters are specified for any other bar codes, they will be ignored by the printer. Do
not use Option 50 with fixed density bar codes, such as POSTNET or Intelligent Mail.
Option 50 can also be used with Option 52 to further customize the dimensions of a PDF417 bar
code. Option 52 allows customization of the number of columns or number of rows for the bar
code.
Syntax
R,50,narrow,wide,gap,nar_space,wide_space |
R1. R
R2. 50
R3. narrow
R4. wide
R5. gap
Option Header.
Option 42.
Enter 1 to print the price field in standard notation, as defined by the
country setting.
Use the monetary formatting packet to select monetary notations and
symbols by country setting. See
for more information. See Appendix C,
make sure the monetary symbol is printable in the font selected for this
field. For monetary symbols other than the dollar sign, use the internal
symbol set.
♦
I 2of5
♦
MSI
Field Option Header.
Option 50.
Dot width of the narrow element. Range: 1 to 99. 1 is the default.
Dot width of the wide element. Range: 1 to 99. 1 is the default.
Additional dot space between characters. Enter a value of 1 to 99. (Code
39, Codabar, I 2of5, MSI only.) 1 is the default.
"Defining the Monetary Formatting
"Symbol Sets/Code
Defining Field Options 4-5
Packet"
Pages," to