M09416
®
Thermal Direct Printer
-Supported DOS FAT file system.
-Folders stored on the SD card should be in the 8.3 filename format.
-Approved SD card manufacturer: SanDisk, Transcend.
2.11. Peel-Off Installation (Option) Assembly
1.
Open the top cover.
2.
Remove two screws in lower cover for hinge holder.
Insert the
screw of
hinge holder
here
3.
Remove 6 screws on the lower inner cover.
Screws
4.
Turn the printer upside down.
XLI
®
18
Insert the
screw of
hinge holder
here
Screws