Configuring The Data Interface; (De)Activating The Internal Rewinder - Avery Dennison AP5.4 User Manual

Hide thumbs Also See for AP5.4:
Table of Contents

Advertisement

05/10 Version 5.05-00

Configuring the data interface

The AP 5.4/5.6 has been pre-configured at our factory for data transmission
through the USB port. Alternatively, printer data can also be transmitted via
RS232, RS422/485 (only with optional I/O board), USB or Ethernet port.
For more information on how to set the parameters, see topic section "Info
Printouts and Parameters",
The order numbers for network and data cables are given in topic section
Accessories
For more information on how to use the Ethernet port, see topic section
"Advanced Applications", chapter
page 18.

(De)activating the internal rewinder

Activate
function, otherwise a fault message will appear!
For information on inserting material, see topic section "Setup", chapter
Inserting Label Material
Set
1.
2. If required, press the cut/feed button to change the direction of rotation.
3. Press the ENTER button to confirm your selection.
USER MANUAL
AP5.4 – AP5.6
INTERFACE PARA > EASYPLUGINTERPR > Interface
Choosing the port:
Configuring the port:
INTERFACE PARA > COM1 PORT > ...
RS232 (COM1):
RS232/422/485 (COM3):
INTERFACE PARA > NETWORK PARAM. > ...
Ethernet:
We recommend that your network administrator configures the network
settings.
USB: no configuration required
.
Only applies to AP 5.4/5.6 dispensers with baffle plate installed.
Ensure that material has been inserted before you activate the rewinding
SYSTEM PARAMETER > Periph. device
Do not confuse this with "Rewinder" because this setting activates the
external rewinder (additional device)!
After being activated, the system checks the direction of rotation of the re-
winder.
Rewinder direct.
Facing outside
"Facing outside" is set by default.
The printer restarts. Afterwards, an additional menu
be opened from the main menu, and this contains the
meter. Using this parameter, you can change the direction of rotation.
INTERFACE PARA > COM3 PORT > ...
Operating the Parameter Menu
Data Transmission with Ethernet
on page 6.
to "Intern Rewinder".
Commissioning and Operation
.
on
REWINDER PARA
can
Rewind direction
para-
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ap5.6

Table of Contents