Instructions For Factory / Field Installation Of High Speed Verifier Assembly 620008F (Factory) And 620008 (Field); Installation Procedure - Mechanical - Avery Dennison SNAP 700 Operator's And Service Manual

106
6. Instructions for Factory / Field Installation of High
Speed Verifier Assembly 620008F (Factory) and
620008 (Field)
Disconnect Power to Printer.
1.
2. Disconnect Stacker Interface Cable.
3. Remove the Rear Cover (save screws).
Install the Bracket, Verifier, Mount Base (621303) on the back of the Upright Frame in the (2) 10-
4.
32 Pem Nuts in the upper most right side of the Frame. Secure with (2) 10-32 x ¾ Cap Screws.
Install the Bracket, Verifier Upright onto the Base Bracket with (2) 8-32 x 3/8 Flat Head Screws.
5.
Tighten securely.
621304 – Bracket, Verifier Upright
990055 – 8-32 x 3/8 FHCS
621303 – Bracket, Verifier,
Mount Base

Installation Procedure - Mechanical

User's Manual—SNAP™ 700 Printer
990083 – 10-32 x ¾ SHCS