Accelerator Pedal - Mitsubishi 2016 Outlander Manual

Cruise control (if so equipped)
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
5
To increase your speed in small amounts,
push up the RES + switch (C) for less than
about 1 second and release it.
Each time you press the RES + switch (C),
your vehicle will go about 1 mph (1.6 km/h)
faster.

Accelerator pedal

While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then push down the SET - switch (B) and
release the switch momentarily to set a new
desired cruising speed.
5-98 Features and controls
To decrease the set speed
There are 2 ways to decrease the set speed.
SET - switch
Push down and hold the SET - switch (B)
while driving at the set speed, and your speed
will slow down gradually.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
I n f o r ma t i o n P r o v i d e d b y :
To slow down your speed in small amounts,
push down the SET - switch (B) for less than
about 1 second and release it.
N00518601283
Each time you push down the SET - switch
(B), your vehicle will slow down by about 1
mph (1.6 km/h).
Brake pedal
While driving at the set speed, use the brake
pedal, which disengages the cruise control,
then push down the SET - switch (B) and
release the switch momentarily to set a new
desired cruising speed.