Cautions On The Handling Of 4-Wheel Drive Vehicles - Mitsubishi 2016 Outlander Manual

Cautions on the handling of 4-wheel drive vehicles

Cautions on the handling of
4-wheel drive vehicles
Tires and wheels
5
Since the driving torque can be applied to the
four wheels, the driving performance of the
vehicle when operating in 4-wheel drive is
greatly affected by the condition of the tires.
Pay close attention to the tires.
 Install only the specified tires on all
wheels. Refer to "Tires and wheels" on
page 11-7.
 Be sure all four tires and wheels are the
same size and type.
When it is necessary to replace any of the
tires or wheels, replace all four.
 All tires should be rotated before the wear
difference between the front and rear tires
is recognizable.
Good vehicle performance
expected if there is a difference in wear
between tires. Refer to "Tire rotation" on
page 9-20.
 Check the tire inflation pressure regularly.
5-88 Features and controls
CAUTION
 Always use tires of the same size, type, and
brand that have no wear differences. Using
N00530801214
tires of different size, type, brands or degree
of wear, will increase the differential oil tem-
perature and result in possible damage to the
driving system. Further, the drive train will
be subject to excessive loading, possibly
leading to oil leakage, component seizure, or
other serious failures.
Towing
cannot be
I n f o r ma t i o n P r o v i d e d b y :
CAUTION
 Do not tow 4-wheel drive vehicles with the
front or rear wheels on the ground (Type A
or Type B) as illustrated. This could result in
damage to the drivetrain, or unstable towing.
If you tow 4-wheel drive vehicles, use Type
C or Type D equipment.
 Even in "4WD ECO" (Electronically con-
trolled 4WD) or "AWC ECO" (S-AWC)
drive mode, the vehicle cannot be towed
with the front or the rear wheels on the
ground.
Jacking up a 4-wheel drive
vehicle
WARNING
 Do not crank the engine while jacking up
the vehicle.
The tire on the ground may turn and the
vehicle may roll off the jack.