Mitsubishi 2016 Outlander Manual page 142

Automatic transaxle (if so equipped)
5
4. Depress the brake pedal with the right
foot.
5. Insert a screwdriver in the shift-lock
release hole (B). Shift the selector lever to
the "N" (NEUTRAL) position while
pressing the screwdriver down.
5-66 Features and controls
Selector lever position display
When the operation mode is put in ON, the
selector lever position is shown on the multi-
information display.
Type 1 Type 2
Warning display
[For vehicles equipped mono-color liquid
crystal display meter]
When the selector lever position
indicator blinks
When the selector lever position indicator
blinks while you are driving, there could be a
malfunction in the automatic transmission
I n f o r ma t i o n P r o v i d e d b y :
system or A/T fluid temperature becomes
abnormally high.
N00513901441
NOTE
 The "A" indicator on the selector lever posi-
tion display will only blink if there is a prob-
lem with the A/T position switch.
It is not seen during normal driving.
N00514001289