Rear Combination Lights - Mitsubishi 2016 Outlander Manual

Side turn signal lights
(if so
equipped)
NOTE
 The side turn signal lights uses an LED
instead of the bulb.
Check with an authorized Mitsubishi Motors
dealer or a repair facility of your choice
when the light needs to be repaired or
replaced.
Front fog lights
(if so equipped)
1. Insert a straight blade (or minus) screw-
driver with a cloth over its tip at the points
indicated by arrows and pry gently to
remove the cover (A).
2. Remove the 3 screws (B) and remove the
light unit.
N00943501147
NOTE
 When unfastening the screws or the fog
N00943601845
light, be careful not to move the beam posi-
tion adjustment screw (C).
I n f o r ma t i o n P r o v i d e d b y :
Replacement of light bulbs
3. While holding down the tab (D), pull out
the socket (E).
4. Turn the bulb (F) counterclockwise to
remove it.
5. To install the bulb, perform the removal
steps in reverse.

Rear combination lights

1. Open the liftgate.
Vehicle care and maintenance
9
N00943701556
9-35