Mitsubishi 2016 Outlander Manual page 95

The indicator light on the engine switch illu-
minates orange.
 ON
All electrical accessories can be used.
The indicator light on the engine switch illu-
minates green.
The indicator light turns off when the engine
is running.
NOTE
 Your vehicle is equipped with an electronic
immobilizer. To start the engine, the ID code
which the F.A.S.T.-key sends must match the
one registered to the immobilizer computer.
(Refer to "Electronic immobilizer (Anti-theft
starting system)" on page 5-18)
Changing the operation mode
If you press the engine switch without press-
ing the brake pedal while the vehicle is sta-
tionary, you can change the operation mode
in the order of OFF, ACC, ON, OFF.
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
CAUTION
 When the engine is not running, put the oper-
ation mode in OFF. Leaving the operation
mode in ON or ACC for a long time when
the engine is not running may cause the bat-
tery to be discharged, making it impossible
to start the engine.
 When the battery is disconnected, the current
operation mode is memorized. After recon-
necting the battery, the memorized mode is
selected automatically. Before disconnect-
N00568001035
ing the battery for repair or replacement,
make sure to put the operation mode in OFF.
Be careful if you are not sure which opera-
tion mode the vehicle is in when the battery
is run down.
 The operation mode cannot be changed from
OFF to ACC or ON if the F.A.S.T.-key is not
detected to be in the vehicle. Refer to "Oper-
ating range for starting the engine and
changing the operation mode" on page 5-15.
I n f o r ma t i o n P r o v i d e d b y :
ACC power auto-cutout function
After approximately 30 minutes has elapsed
with the operation mode in ACC, the function
automatically cuts out the power for the audio
system and other electric devices that can be
operated with that mode.
When the engine switch is pressed while the
operation mode is in ACC, the power is sup-
plied again to those devices.
NOTE
 It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to approximately 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult an
authorized Mitsubishi Motors dealer.
On vehicles equipped with Mitsubishi
Motors Multi-Communication
screen operations can be used to make the
adjustment.
Refer to the separate Mitsubishi Multi-Com-
munications System manual for details.
Features and controls
N00568101023
5
System,
5-19