Mitsubishi 2016 Outlander Manual page 331

Changing the mode selection
To change the position and amount of air
flowing from the vents, press the MODE
switch or defogger switch. Refer to "MODE
switch" on page 7-9, "Defogger switch" on
page 7-9.
These symbols are used in the next several
illustrations to demonstrate the quantity of air
coming from the vents.
: Small amount of air from the vents
: Medium amount of air from the vents
: Large amount of air from the vents
Face position
Air flows only to the upper part of the passen-
ger compartment.
Foot/Face position
N00736401605
Air flows to the upper part of the passenger
compartment, and flows to the leg area.
NOTE
 The foot/face air flow ratio can be adjusted
with the mode selection in the "
tion.
For further information, we recommend you
to consult an authorized Mitsubishi Motors
dealer or a repair facility of your choice.
On vehicles equipped with Mitsubishi Multi-
Communication System, screen operations
can be used to make the adjustment. Refer to
the separate owner's manual for details.
I n f o r ma t i o n P r o v i d e d b y :
Foot position
Air flows mainly to the leg area.
" posi-
Comfort controls
Vents
7
7-3