Mitsubishi 2016 Outlander Manual page 178

Adaptive Cruise Control System (ACC) (if so equipped)
5
1- ACC indicator:
Indicating that the ACC is turned on.
2- Control state indicator:
Indicating that ACC is activated.
3- Set speed indicator:
Indicating the set speed.
If the set speed is not set, "---" is
shown.
4- Front vehicle indicator:
Indicating when the ACC detects a
vehicle ahead.
When a front vehicle is detected while
the ACC is activated, the 'Active' front
vehicle indicator shown in the illustra-
tion below will illuminate.
When a front vehicle is detected while
the ACC is not activated or the ACC is
canceled, the 'Stand by' front vehicle
indicator will illuminate.
5-102 Features and controls
State
Display
Stand by
Vehicle in
front detected
5-Following distance indicator:
Indicating the following distance.
Two states: "Stand by" and "Active"
When a front vehicle is detected while
the ACC is activated, the 'Active' fol-
lowing distance indicator shown in the
illustration below will illuminate.
When a front vehicle is detected while
the ACC is not activated or the ACC is
canceled, the 'Stand by' following dis-
tance indicator will illuminate.
Following State
distance set-
Stand by
ting symbol
Long
Middle
Short
I n f o r ma t i o n P r o v i d e d b y :
How to use ACC
Active
To turn on ACC
When the operation mode is in the "ON"
position, press the "ACC ON/OFF" switch.
The ACC indicators will appear in the multi
information display.
Active
N00577200023