Cruise Control Switch - Mitsubishi 2016 Outlander Manual

your vehicle if it becomes too close to the
vehicle in front.
The cruising set speed can be set from 25
mph (40 km/h) to 110 mph (180 km/h). The
distance can be selected from three levels.
If the vehicle in front decelerates, the ACC
will automatically apply limited braking to
maintain the distance, and if the front vehicle
then accelerates, the ACC will automatically
accelerate your vehicle up to the set speed. If
your vehicle is approaching too close to the
front vehicle, a buzzer will sound and a warn-
ing is shown in the multi information display.
When the ACC detects no vehicle ahead, the
set speed will be maintained.
Conventional cruise control mode without the
distance control can also be selected.
Stop lights are illuminated during automatic
braking.
WARNING
 Before using the ACC, read this entire sec-
tion to understand the limitations of this
system. Failure to follow instructions
could result in an accident.
 Never rely solely on the ACC. The ACC is
not a collision avoidance system or an
automatic driving system. It is designed to
use only limited braking and is never a
substitute for your safe and careful driv-
ing. Always be ready to apply the brakes
manually.

Cruise control switch

1- "ACC ON/OFF" switch
Used to turn on and off the ACC sys-
tem.
2- "SET -" switch
Used to set a desired speed or to reduce
the set speed.
I n f o r ma t i o n P r o v i d e d b y :
Adaptive Cruise Control System (ACC) (if so equipped)
3- "RES +" switch
Used to resume the control function
after cancelling the ACC or the conven-
tional cruise control.
Also used to increase the set speed.
4- "CANCEL" switch
Used to cancel the control function of
the ACC or the cruise control.
5- ACC distance switch
Used to set or change the following dis-
tance between your vehicle and a vehi-
cle in front.
NOTE
 Operate the individual switches correctly and
N00577000021 one after another.
The ACC may be turned off or its control
function may be cancelled if two or more
switches are pressed concurrently
ACC Indicators
While the ACC is turned on, indicators for
the ACC are shown in the multi information
display.
Features and controls
5
N00577100035
5-101