Mitsubishi 2016 Outlander Manual page 275

4. When enrollment is "enabled," the voice
model is on; when enrollment is "dis-
abled," the voice model is off. Say the
command that fits your needs.
Say "Retrain" to start the speaker enroll-
ment process and recreate a new voice
model. (Refer to "Speaker enrollment" on
page 5-197.)
Connecting the Bluetooth
interface and Bluetooth
Before you can make or receive hands-free
calls or play music using the Bluetooth
interface function, you must pair the Blue-
® ®
tooth device and Bluetooth 2.0 interface.
NOTE
 Pairing is required only when the device is
used for the first time. Once the device has
been paired with the Bluetooth
face, all you need is to bring the device into
the vehicle next time and the device will
®
connect to the Bluetooth 2.0 interface auto-
matically (if supported by the device). The
®
device must have Bluetooth
connect.
®
Up to 7 Bluetooth devices can be paired
®
with the Bluetooth 2.0 interface.
If multiple paired Bluetooth
available in the vehicle, the cellular phone or
music player most recently connected is auto-
matically connected to the Bluetooth
interface.
You can also change a Bluetooth
be connected.
®
2.0
To pair
®
device
N00565001281
To pair a Bluetooth
®
tooth 2.0 interface, use either one of the fol-
®
2.0
lowing 2 methods (Type 1 or Type 2).
 Pairing procedure- Type 1
equipped)
1. Stop your vehicle in a safe area, put the
selector lever in the "P" (PARK) position
and pull the parking brake lever.
®
2.0 inter-
NOTE
 You cannot pair any Bluetooth
the Bluetooth
turned ON to
cle is parked. Before pairing a Bluetooth
device with the Bluetooth
confirm that the vehicle is parked in a safe
location.
I n f o r ma t i o n P r o v i d e d b y :
®
devices are
®
2.0
®
device to
®
device with the Blue-
(if so
®
device with
®
2.0 interface unless the vehi-
®
®
2.0 interface,
Bluetooth® 2.0 interface (if so equipped)
2. Press the SPEECH button (except for
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
3. Say "Setup."
4. Say "Pairing Options."
5. The voice guide will say "Select one of
the following: pair, edit, delete, or list."
Say "Pair."
NOTE
 If 7 devices have already been paired, the
voice guide will say "Maximum devices
paired" and then the system will end the
pairing process. To register a new device,
delete one device and then repeat the pairing
process.
(Refer to "Selecting a device: Deleting a
device" on page 5-203.)
6. The voice guide will say "Please say a 4-
digit pairing code." Say a 4-digit number.
When the confirmation function is on, the
system will confirm whether the number
said is acceptable. Answer "Yes."
Answer "No" to return to pairing code
selection.
Features and controls
5
5-199