Help Function - Mitsubishi 2016 Outlander Manual

Bluetooth® 2.0 interface (if so equipped)
Useful voice commands

Help function

®
The Bluetooth 2.0 interface is equipped
5
with a help function.
If you say "Help" when the system is waiting
for a voice command input, the system will
tell you a list of the commands that can be
used under the circumstances.
Canceling
There are 2 cancel functions.
If you are at the main menu, say "Cancel" to
®
exit from the Bluetooth 2.0 interface.
If you are anywhere else within the system,
say "Cancel" to return to the main menu.
NOTE
 You can return to the previous menu by say-
ing "Go Back." (if so equipped)
Confirmation function setting
®
The Bluetooth 2.0 interface is equipped
with a confirmation function.
5-196 Features and controls
With the confirmation function activated, you
are given more opportunities than normal to
N00564200016
confirm a command when making various
settings to the Bluetooth
allows you to decrease the possibility that a
N00564301027
setting is accidentally changed.
The confirmation function can be turned on
or off by following the steps below.
1. Press the SPEECH button (except for
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
2. Say "Setup."
N00564401028
3. Say "Confirmation prompts."
4. The voice guide will say "Confirmation
prompts are <on/off>. Would you like to
turn confirmation prompts <off/on>."
Answer "Yes" to change the setting or
answer "No" to keep the current setting.
5. The voice guide will say "Confirmation
prompts are <off/on>" and then the sys-
tem will return to the main menu.
Security function
It is possible to use a passcode as a security
function by setting a passcode of your choice
N00564501032
®
for the Bluetooth 2.0 interface.
When the security function is turned on, it is
necessary to make a voice input of a 4-digit
I n f o r ma t i o n P r o v i d e d b y :
passcode in order to use all functions of the
Bluetooth
tion.
®
2.0 interface. This
Setting the passcode
Use the following procedure to turn on the
security function by setting a passcode.
1. Press the SPEECH button (except for
vehicles with Mitsubishi Multi-Commu-
nication System) or PICK-UP button (for
vehicles with Mitsubishi Multi-Commu-
nication System).
2. Say "Setup."
3. Say "Passcode."
4. The voice guide will say "Passcode is dis-
abled. Would you like to enable it?"
Answer "Yes."
Answer "No" to cancel the setting of the
passcode and return to the main menu.
5. The voice guide will say "Please say a 4-
digit passcode. Remember this passcode.
It will be required to use this system."
Say a 4-digit number which you want to
set as a passcode.
6. For confirmation purposes, the voice
guide will say "Passcode <4-digit pass-
N00564601105
code>. Is this correct?" Answer "Yes."
Answer "No" to return to the passcode
input in Step 5.
®
2.0 interface, except for recep-