Table of Contents
Advertisement
Refer to "Changing the function settings"
on page 5-140.
2. Lightly press the multi information dis-
play switch to select "
sound setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from ON (operation sound on)
to OFF (operation sound off), or from
OFF to ON.
The setting is changed to the selected con-
dition.
NOTE
If the battery is disconnected, the memory of
the operation sound setting is erased and is
automatically set to "ON" (operation sound
on).
The operation sound setting only deactivates
the operation sound of the multi information
display switch and rheostat illumination but-
ton. The warning display and other sounds
cannot be deactivated.
Changing the time until "REST
REMINDER" is displayed
The time until the display appears can be
changed.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
" (operation
Refer to "Changing the function settings"
on page 5-140.
2. Lightly press the multi information dis-
play switch to select "ALARM" (rest time
setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to display "ALARM" (rest time setting).
4. Lightly press the multi information dis-
play switch to select the time until the dis-
play appears.
5. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to change the setting to the selected time.
NOTE
If the battery is disconnected, the memory of
the unit setting is erased and is automatically
set to the "OFF".
The drive time is reset when the ignition
switch is in the "LOCK" or "OFF" position
or the operation mode is in OFF.
N00557501160
Changing the turn signal sound
It is possible to change the turn signal sound.
I n f o r ma t i o n P r o v i d e d b y :
Multi Information display - Type 1
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to "Changing the function settings"
on page 5-140.
2. Lightly press the multi information dis-
play switch to select
turn signal sound)
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from 1 (turn-signal sound 1) to 2
(turn-signal sound 2), or from 2 to 1.
The setting changes to the selected turn
signal sound.
Changing the momentary fuel con-
sumption display
It is possible to change the bar graph setting
of the momentary fuel consumption display.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to "Changing the function settings"
on page 5-140.
2. Lightly press the multi information dis-
N00563501080
play switch to select
the momentary fuel consumption display)
Features and controls
5
. (changing the
N00563601049
. (changing
5-145
Advertisement
Chapters
Table of Contents
