Mitsubishi 2016 Outlander Manual page 183

NOTE
 There is some time lag until the vehicle
begins accelerating to the new set speed after
the set speed has been changed.
 The set speed can be changed even while
your vehicle is following a vehicle in front
using the ACC. In this case, however,
although the set speed itself is increased,
your vehicle will not accelerate.
 When the switch is held, a buzzer will sound
every time the set speed changes
By using the accelerator pedal:
When the accelerator pedal is depressed
while driving with the ACC control working,
you can accelerate the vehicle beyond the
presently set speed.
When the vehicle speed reaches your desired
speed, push down and release the "SET -"
switch and release the accelerator pedal; the
new speed is then set in the system.
WARNING
 The ACC braking control and approach
alarm functions will not work while the
accelerator pedal is depressed.
NOTE
 The set speed indicator in the multi informa-
tion display will show "---" while the accel-
erator pedal is depressed.
 If the "SET -" button is not pushed down
while depressing the accelerator pedal, your
vehicle speed will return to the set speed,
after the accelerator pedal is released. When
the accelerator pedal is released, the ACC
braking control and approach alarm func-
tions may not immediately work.
I n f o r ma t i o n P r o v i d e d b y :
Adaptive Cruise Control System (ACC) (if so equipped)
To decrease the set speed
There are two ways to decrease the set speed.
By using the "SET -" switch:
The set speed will decrease by 1 mph (1
km/h) every time you push down the "SET -"
switch while the ACC is activated. If you
hold the switch pushed down, the set speed
decreases in 5 mph (5 km/h) increments.
NOTE
 There is some time lag until the vehicle
begins decelerating after the set speed has
been changed.
Features and controls
N00581600028
5
5-107