Mitsubishi 2016 Outlander Manual page 220

Multi Information display - Type 1
Changing the language on Mit-
subishi Multi-Communication
System or Bluetooth
to match the multi information
display
5
The language used in Mitsubishi Multi-Com-
munication System (if so equipped) or Blue-
®
tooth 2.0 interface (if so equipped) can be
changed automatically to the same language
as that shown in the multi information dis-
play.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen. Refer to "Changing the
function settings" on page 5-140.
2. Lightly press the multi information dis-
play switch to select "
cooperative control).
5-144 Features and controls
®
2.0 interface
N00529801302
3. Press and hold the multi information dis-
play switch to switch from A/1 (language
cooperation: enabled) to M/2/P (language
cooperation: disabled), or from M/2/P to
A/1. The setting is changed to the selected
condition.
NOTE
 If the battery is disconnected, the language
" (language
cooperative control is automatically set to
"A or 1" (language cooperation: enabled).
 The language cooperation setting can be
switched in the following manner.
I n f o r ma t i o n P r o v i d e d b y :
NOTE
• When "A or 1" (language cooperation:
enabled) has been selected, the language for
Mitsubishi Multi-Communication System
®
(if so equipped) or Bluetooth
(if so equipped) is automatically changed to
the language selected for the multi informa-
tion display.
However, this changing function may not
work depending on the language selected
for the multi information display.
• When "M, 2 or P" (language cooperation:
disabled) has been selected, the language
for Mitsubishi Multi-Communication Sys-
tem (if so equipped) or Bluetooth
interface (if so equipped) is not automati-
cally changed to match the language
selected for the multi information display.
 The language on the audio system's display
does not automatically change when you
select A or 1 (language cooperation:
enabled) in the language cooperation control.
Operation sound setting
You can turn off the operation sounds of the
multi information display switch and rheostat
illumination button.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
2.0 interface
®
2.0
N00557401156