Accelerator Pedal - Mitsubishi MIRAGE Service Manual

Indicator
2. Accelerate or decelerate to your desired
speed, then press and release the SET -
switch (B) when the indicator is illumi-
nated. The vehicle will then maintain the
desired speed.
NOTE
 When you release the SET - switch, the vehi-
cle speed will be set.
To increase the set speed
There are 2 ways to increase the set speed.
RES + switch
Press and hold the RES + switch (C) while
driving at the set speed, and your speed will
then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
I n f o r ma t i o n P r o v i d e d b y :
Cruise control (if so equipped)
To increase your speed in small amounts,
press the RES + switch for less than about 1
second and release it.
Each time you press the RES + switch, your
vehicle will go about 1 mph (1.6 km/h) faster.

Accelerator pedal

N00518500344
While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then press the SET - switch (B) and release
the switch momentarily to set a new desired
cruising speed.
To decrease the set speed
There are 2 ways to decrease the set speed.
Features and controls
5
N00518600273
5-53