Listen To Radio - Mitsubishi 2016 Outlander Manual

Listen to Radio

Listen to Radio
This explains how to listen to AM and FM
radio broadcasts.
To Listen to the Radio
Press the RADIO key to switch the band.
Switch between AM and FM bands.
7
The selected band is indicated on the display.
NOTE
 Bands switch in the order AM, FM1, FM2,
SIR1*, SIR2*, SIR3*, and SIR4*.
 If no signal is received, bands will not be
switched to SIR2, SIR3, or SIR4.
*: When a satellite tuner is connected
Manual/Seek Station Selection
Turn the /SEL key to the frequency to lis-
ten to.
Reduces the frequency
/SEL key
being received.
(counter-
clockwise)
7-28 Comfort controls
Increases the frequency
/SEL key
being received.
(clockwise)
N00716900069
Release the button to start
key
seek station selection, and
(hold down)
when a station is received,
key
scanning stops.
(hold down)
Scan Station Selection
Collective search for stations that can be
received.
Press the SCAN key.
When a station is received, this is played for 5
seconds, then the product searches for the
next station.
NOTE
 Press this button again while receiving the
station to return to normal reception.
Preset Memory
Register the broadcast station in advance, and
select this at a later time.
1. Tune in to the frequency to register.
I n f o r ma t i o n P r o v i d e d b y :
2. Hold down any of the keys from the 1RPT
key to the 6 key.
A "Beep" sounds, and the preset key is
registered.
NOTE
 The preset memory can register a maximum
of 6 stations for each band.
 If a preset key that already has a station reg-
istered is selected, then this is overwritten
with the new preset.
 Pressing the preset key will select the previ-
ously registered frequency.
CAT Search
During RBDS broadcast reception, select
CAT (category content), and automatically
scan for stations.
1. During FM reception, press the CAT key.
This switches to the CAT selection mode.
2. Press the CAT key to select CAT.
3. Press the key or key.
The CAT (category content) indicator will
flash, and station selection will automati-
cally start.
When a station is received, the frequency
is displayed.