Mitsubishi 2016 Outlander Manual page 134

Hide thumbs Also See for 2016 Outlander:
Table of Contents

Advertisement

Outside rearview mirrors
To adjust the mirror position
The outside rearview mirrors can be adjusted
when the ignition switch is in the "ON" or
"ACC" position or the operation mode is put
in ON or ACC.
Move the lever (A) to the same side as the
5
mirror you wish to adjust.
Except for vehicles equipped
with the mirror retractor
switch
Vehicles equipped with the
mirror retractor switch
L- Left outside mirror adjustment
R- Right outside mirror adjustment
Press the switch (B) to adjust the mirror posi-
tion.
1- Up
2- Down
3- Right
5-58
Features and controls
4- Left
NOTE
N00549101167
 After adjusting, return the lever to the
"•"(OFF) position.
To retract the mirror
The outside mirror can be retracted towards
the side window to prevent damage when
parking in tight locations.
Except for vehicles equipped with the
mirror retractor switch
Push the mirror towards the back of the vehi-
cle with your hand to retract it in. When
extending the mirror, pull it out towards the
front of the vehicle until it clicks to lock in
place.
I n f o r ma t i o n P r o v i d e d b y :
For vehicles equipped with the mirror
retractor switch
Retracting and extending the mir-
rors using the mirror retractor
switch
With the ignition switch in the "ON" or
N00549201113
"ACC" position or the operation mode in ON
or ACC, push the mirror retractor switch to
retract the mirrors. Push it again to extend the
mirrors to their original positions.
After placing the ignition switch in the
"LOCK" position or the operation mode in
OFF, it is possible to retract and extend the
mirrors using the mirror retractor switch for
about 30 seconds.

Advertisement

Table of Contents
loading

Table of Contents