Defogger Switch - Mitsubishi 2016 Outlander Manual

Mode switch
To change the amount of air flowing from the
vents, press the MODE switch. Each time the
MODE switch is pressed, the mode changes
to the next one in the following sequence:
"  " "  " "  "
"
" ". The selected mode is shown in the dis-
play (A). Refer to "Changing the mode selec-
tion" on page 7-3.
Type 1
Type 2

Defogger switch

N00737101221
When this switch is pressed, the mode
changes to the "
speed will be set at the maximum automati-
cally. The indicator light (A) will come on
"  " " 
and the " " mode is shown in the display
(B).
Type 1
Type 2
I n f o r ma t i o n P r o v i d e d b y :
Automatic climate control air conditioner
 When the defogger switch is pressed, the air
N00703401038
" mode and the blower
 The indicator light (A) will go off when
Air selection switch
Normally, use the outside air position to keep
the windshield and side windows clear and to
quickly remove fog or frost from the wind-
shield.
To change the air selection, simply press the
air selection switch.
 Outside air {Indicator light (A) OFF}
 Recirculated air {Indicator light (A) ON}
NOTE
conditioning system automatically operates
and outside air (as opposed to recirculated
air) is selected. This automatic switching
control is carried out to prevent misting of
the windows even if "Disable automatic air
conditioning control" or "Disable automatic
air selection control" is set. Refer to "Person-
alizing the air conditioning switch (Changing
the function setting)" on page 7-11, "Person-
alizing the air selection (Changing the func-
tion setting)" on page 7-10.
adjusting the blower speed.
Outside air is introduced into the passen-
ger compartment.
Air is recirculated inside the passenger
compartment.
Comfort controls
7
N00737201378
7-9