Inside liftgate release
NOTE
When the battery is discharged or discon-
nected, the power liftgate cannot be opened
even manually. At that time, the liftgate can
be opened only by using the inside liftgate
release. Refer to "Inside liftgate release" on
page 5-44.
5
To close the power liftgate, pull the power
liftgate grip (B) downward and release it
before the power liftgate is completely
closed, and then gently close the power lift-
gate from the outside.
CAUTION
The auto reverse mechanism will not operate
when the power liftgate is closed manually.
Therefore be especially careful not to trap a
hand or finger.
5-44
Features and controls
CAUTION
Do not fully close the power liftgate with
your hand still on the power liftgate grip.
Doing so could trap and injure your hand or
arm.
Power liftgate easy closer
The power liftgate easy closer is designed to
help the power liftgate close securely.
If the power liftgate is closed to a position
where it is detected as being ajar, it closes
automatically.
WARNING
Keep your hands and fingers away from
the power liftgate while the power liftgate
easy closer is activated. To return the
power liftgate to the slightly ajar position
while the power liftgate easy closer is acti-
vated, press the power liftgate open
switch.
CAUTION
Do not touch the latch (A) on the inside of
the power liftgate. The power liftgate easy
closer could operate and catch your fingers.
I n f o r ma t i o n P r o v i d e d b y :
N00576400028
NOTE
The power liftgate easy closer operates even
when the power liftgate main switch is OFF.
Repeated continuous operation of the handle
could activate the protection circuit and tem-
porarily prevent the power liftgate easy
closer from operating.
If this occurs, wait about 1 minute before
operating the power liftgate easy closer
again.
Inside liftgate release
The inside liftgate release is designed to pro-
vide a way to open the liftgate if the battery is
dead or disconnected.
The liftgate release lever (see illustration) is
mounted on the liftgate.
N00523101084