Theft-Alarm System; Armed Stage - Mitsubishi 2016 Outlander Manual

Hide thumbs Also See for 2016 Outlander:
Table of Contents

Advertisement

You and your family should familiarize your-
selves with the location and operation of the
liftgate release lever.
To open
1. Open the lid (A) inside of the liftgate.
2. Move the lever (B) to open the liftgate.
Liftgate
Power liftgate
3. Push out on the liftgate to open it.
CAUTION
 Always keep the release lever lid on the lift-
gate closed when driving so that your lug-
gage cannot accidentally bump the lever and
open the liftgate.

Theft-alarm system

The theft-alarm system is designed to provide
protection from unauthorized entry into the
vehicle. This system is operated in three
stages: the first is the "armed" stage, the sec-
ond is the "alarm" stage, and third is the "dis-
armed" stage. If triggered, the system
provides both audible and visual alarm sig-
nals.
I n f o r ma t i o n P r o v i d e d b y :
CAUTION
 Do not modify or add parts to the theft-alarm
system. Doing so could cause the theft-alarm
to malfunction.

Armed stage

Park the vehicle and stop the engine. Arm the
system as described below.
1. Except for vehicles equipped with the
F.A.S.T.-key, remove the key from the
ignition switch.
For vehicles equipped with the F.A.S.T.-
key, put the operation mode in OFF.
2. Make sure that the engine hood is closed.
3. Lock all doors and the liftgate by using
the keyless entry system or the F.A.S.T.-
key operation.
Arm the system and leave
N00510201267
Features and controls
Theft-alarm system
5
N00510301200
5-45

Advertisement

Table of Contents
loading

Table of Contents