Making A Flat Seat - Mitsubishi 2016 Outlander Manual

Making a flat seat

4
To return
1. Pull the strap (A), then raise the seatback
until it locks securely into place.
Push lightly on the seatback to confirm
that it has actually been secured.
2. Install the head restraints.
4-16 Seat and restraint systems
Making a flat seat
The entire interior of the vehicle may be used
for sleeping accommodations by removing
the head restraints and fully reclining all the
seats when the vehicle is stopped.
WARNING
 Never drive with passengers or cargo on
the flat seat. This is extremely dangerous
and can cause severe or fatal injury or
death in an accident or if heavy braking is
required.
CAUTION
 Adjust the seats only when the vehicle is
stopped in a safe place.
 Seat should be adjusted only by adults to
avoid accidents.
 When sliding the seats, be careful not to
catch your hand or leg.
 Do not walk around on top of the seats after
they have been laid flat because the footing
is uneven. It is safest to move about on your
hands and knees.
 To ensure the seats are locked securely,
attempt to move them back and forth.
 Do not jump on or drop heavy objects on the
seatbacks.
I n f o r ma t i o n P r o v i d e d b y :
CAUTION
 To raise the seatback of the front seat, firmly
N00404801166
place your hand on the seatback, pull the
seatback lock knob up, and raise the seatback
slowly. (Refer to "To adjust the seatback" on
page 4-6.) Do not let children adjust the seat-
back.
1. Remove the head restraints from the front
seats and raise the arm rest on the second
row seats.
For vehicles with a cargo area cover,
remove the cover.
(Refer to "Head restraints" on page 4-10,
"Arm rest" on page 4-9 and "Cargo area
cover" on page 5-233.)
2. Slide the second row seats back as far as
possible (vehicles with second row seat
slide function).
(Refer to "To adjust the seat forward or
backward" on page 4-8.)